Pressure Sensitive Adhesive
Pressure sensitive adhesives form viscoelastic bonds that are aggressively and permanently tacky. They adhere with just finger or hand pressure and do not require activation by water, solvent or heat. Pressure sensitive adhesives are often based on non-crosslinked rubber adhesives in a latex emulsion or solvent-borne form.
Advantages of pressure sensitive:
· Long-lasting stickiness
· Self-adhesive coating
· Coating and assembly can be separated
DeepMaterial adheres to the research and development concept of “market first, close to the scene”, and provides customers with comprehensive products, application support, process analysis and customized formulas to meet customers’ high-efficiency, low-cost and environmental protection requirements.
Pressure Sensitive Adhesive Product Selection
| Product Line | Product Series | Product Category | Product Name | Application Characteristics |
| Pressure sensitive |
Moisture curing | Label class | DM-6588 |
General label adhesive, easy to die-cut, high initial adhesion, excellent aging resistance |
| DM-6589 |
Suitable for all kinds of low temperature applications above -10°C, easy to die cutting, excellent viscosity at room temperature, can be used for cold chain logistics labels |
|||
| DM-6582 |
Suitable for all kinds of low temperature applications above -25°C, easy to die cutting, excellent viscosity at room temperature, can be used for cold storage labels |
|||
| DM-6581 |
High initial tack, high stickiness, excellent resistance to plasticization, used in film labels |
|||
| DM-6583 |
High adhesion, cold flow pressure sensitive adhesive, can be applied to tire labels |
|||
| DM-6586 |
Medium-viscosity removable adhesive, strong adhesion to PE surface material, can be used for removable labels |
|||
| Back stick type | DM-6157 |
High-quality, high-viscosity hot-melt pressure-sensitive adhesive specially developed for TV backplane adhesives. The product has light color, low odor, excellent initial adhesion performance, good cohesion, high adhesion, and excellent high temperature resistance. Humidity is 85% and it has certain holding power at 85°C high temperature. It can pass the high temperature and high humidity test and is used for TV back panel pasting. |
||
| DM-6573 |
It is a reactive black polyurethane hot melt adhesive, cured with moisture. This material is pressure sensitive and provides instant high initial strength after connecting parts. It has good basic bonding performance and the opening time suitable for automatic or manual assembly line production. |
|||
| UV-curable | TV backplane | DM-6636 | UV-curable acrylate pressure-sensitive adhesive has certain pressure-sensitivity after curing. The formula is based on solvent-free modifified acrylate, and the color is colorless or light yellow liquid. The adhesive surface can be cured quickly in a few seconds, thus achieving faster production speed and lower cost. After a period of post-curing after UV curing, the mechanical properties are better. |
Pressure Sensitive Adhesive Product Data Sheet
| Product Line | Product Category | Product Name | Colour | Viscosity (mPa·s)100°C | Dispensing temperature( °C) | Opening hours | Softening Point | Store/ °C /M |
| Pressure sensitive rubber base | Label class | DM-6588 | Light yellow to amber | 5000-8000 | 100 | 88±5 | 5-25/6M | |
| DM-6589 | Light yellow to amber | 6000-9000 | 100 | * | 90±5 | 5-25/6M | ||
| DM-6582 | Light yellow to amber | 10000-14000 | 100 | * | 105±5 | 5-25/6M | ||
| DM-6581 | Light yellow to amber | 6000-10000 | 100 | * | 95±5 | 5-25/6M | ||
| DM-6583 | Light yellow to amber | 6500-10500 | 100 | * | 95±5 | 5-25/6M | ||
| DM-6586 | Light yellow to amber | 3000-3500 | 100 | * | 93±5 | 5-25/6M | ||
| Back stick | DM-6157 | Light yellow to amber | 9000-13000 | 150-180 | * | 111±3 | 5-25/6M | |
| DM-6573 | Black | 3500-7000 | 150-200 | 2-4 min | 105±3 | 5-25/6M |
